For this project you will need:
*slotted tupperware bin (I found mine in the organization/storage section of Walmart).
*1/4 inch dowl rod (can be purchased at any hardware or craft store).


 I then inserted each ribbon spool onto the rod. Once I had enough spools on the rod I then stuck each end of rod into the holes on each side of the bin.

 Like so…Isn’t that cool?

Then I pulled each ribbon end through a hole on the front. Now the spools can’t roll and I don’t have to worry about a tangled mess.

Bin: $3
dowls: $.12 (clearance)
My mental state: sane and gleeful 😉